beautypg.com

Harken 7410.11 MKIV Jib Reefing & Furling User Manual

Page 25

background image

MKIV Underdeck Unit 0

25

Tip: Do not remove foil clamp screws to adjust foil.

Loosen screws, hold foils and bring clamp away

from foils. Adjust and reclamp.

Assembly Feeder/Final

Slide halyard swivel above feeder. Place feeder in foil

recess. Push screw down so tab catches under foil.

Tighten screw.
Note: Screw will turn with some difficulty. It is plastic

coated to prevent loosening due to vibration.
Important: When removing screw, loosen no more

than one full turn. Slide screw up and remove feeder.