beautypg.com

Harken 7410.11 MKIV Jib Reefing & Furling User Manual

Page 27

background image

MKIV Underdeck Unit 0

27

Check location of turnbuckle. It may be below deck

under the hub assembly. If it is inside the torque tube,

follow this procedure:
Slide torque tube onto foil and clamp just below top of

feeder gap as shown. Use halyard to lift foil assembly.

Commissioning

Turnbuckle on Boat

Adjust turnbuckle

Reassemble Torque Tube to lower unit. Lift foils so top

is 7/16" (11 mm ) below upper terminal.
Slide foil clamp into foil notches and tighten screws

to secure.

CAUTION! To avoid injury, make sure drum

assembly and foils are securely lifted using

a halyard before adjusting turnbuckle.