Harken 7410.11 MKIV Jib Reefing & Furling - Manual

Please read these instructions carefully before installing, servicing, or operating the equipment.
This manual may be modified without notice. See: www.harken.com/manuals for updated versions.
PLEASE SAVE THESE INSTRUCTIONS
MKIV UNDERDECK JIB REEFING & FURLING
Unit 0
Installation Manual – Intended for specialized personnel or expert users
4427 01/14
Preassembly
Parts 4
Rigging Parts Check/Tools 5
Dimensions/Sailmaker's Instructions 6
Rigging Options/Turnbuckle 7–8
Stay Into Foil Options 8
Hub Assembly
Install Hub Assembly in Bow 9
Under-Deck Lead Block 10
Preassembly
Top Foil Length 11
Short Top Foil 12
Foil Length Check 13
Assembly
Foils/Connectors 14–20
Halyard Swivel 20
Torque Tube Assembly 21
Rod Rigging 22
Attach Turnbuckle/Foils to Boat 23–24
Feeder/Final 25
Commissioning
Turnbuckle 26–27
Lead Line to Cockpit 28
Halyard Swivel Height/Angle 29
Halyard Restrainer/Tension 30
Operation
Halyard/Headstay Tension 31
Raise Sails/Storm Sails/Reefing 32–33
Secure Sail 33
Race Conversion 33
Maintenance/Troubleshooting
Clean/inspect 34
Replace Line 34
Storage/Transporting/Remove 34
Troubleshooting 35
Parts List 36–37
Drilling Template 38