Harken 7410.11 MKIV Jib Reefing & Furling - Manual (Page 15)

MKIV Underdeck Unit 0 15
Assembly Top Foil
Lay top foil in line with others. Slide stay
into top foil and down line of foils or slide
each foil up stay.
Cut out template at right. Line up template
with top of foil and scribed line. Tape in
place. Use a center punch to mark holes.
Check center punch marks to confirm
they are 3/16" (5 mm) and .8" or 13/16"
(20 mm) from top of foil.
Drill two (2) 1/8" (3.2 mm) holes for
trim cap.
3 / 16 " (5 mm)
.8" or 13/16"
(20 mm)
Foil To
p
!