Guralp Systems CMG-DM24 User Manual

Page 19

Text mode
Original mode

Operator’s Guide DM-24 Digitiser

Issue G January 2003

2) If the user presses the Enter key “ok” will appear on a new line, signifying that

there is two-way communication with the digitiser.

3) Re-boot the digitiser by turning the power off then on again and the initial boot-

up information will be displayed similar to that shown in the picture below.

4) In the instance shown above, the user then has 13 seconds to type “h8upload”

then press enter. After the next message “Ready to upload” appears, as shown
below, right click anywhere on the terminal window and select send file from
the pop-up menu.