Guralp Systems CMG-DM24 User Manual

Page 18

Operator’s Guide DM-24 Digitiser

Issue G January 2003

2.4 FLASH MEMORY UPGRADE

For the later models with Flash memory it is possible for the user to upgrade the
digitiser software.

Guralp Systems have a mailing list to keep Scream users up to date. To subscribe, send
an email to [email protected] with a single line in the body containing "subscribe
screamusers" (without the quotes). This will keep the users informed of latest upgrades
available.

To find out what the users current software version is, either double click on the
digitiser icon in the main Start-up window and the Configuration Setup window will
open up, or right click on the icon and select Configure from the pop-up menu for the
same Configuration Setup window. The picture below shows “Software revision
v.091”.

First obtain the latest software, then proceed as the following instructions.

1) In SCREAM’s main startup window, right click on the digitiser icon and select

Terminal from the pop-up menu. This will open as shown