Guralp Systems CMG-DM24 - Manual (Page 11)

Operator’s Guide DM-24 Digitiser
Issue G January 2003 9
2. OPERATING INSTRUCTIONS
2.1 STAND-ALONE CMG-DM24 FRONT PANEL CONNECTORS
PANEL & CONNECTORS ON STAND-ALONE DIGITISER
(DM24-S6 SHOWN)
Sensor A (Sensor B):- CMG-DM24-S3 has one 26 way Mil-Spec sensor input plug,
while the CMG-DM24-S6 has two (sensor A and sensor B as shown in the
diagram at the front of this section). Each sensor input (as with the 19inch rack
mount model) have high impedance differential inputs. The sensor inputs carry
sensor power and three channels of differential velocity, mass and calibration
signals (see pin-out table in the Appendices).
TOP PANEL & CONNECTORS ON STAND-ALONE DIGITISER
(DM24-S6 SHOWN)