Gasboy Buypass - Manual (Page 17)

MDE-4606B Gasboy CFN Series Buypass Credit and Debit Card Networks · August 2010 Page 13
Configuring the Site Controller Configuration
• The second PIN step is used to prompt for an encoded secure PIN number, which is
associated with Debit Cards. Unlike the local and Fleet Card prompts, the second PIN
prompt is not restricted to a limited set of acceptable prompts. The most common debit
prompts are as follows:
Enter Your PIN
Enter PIN Number
Enter secure PIN
Note: The sequence number for the two PIN steps are contiguous. The second PIN step must
immediately follow the first PIN prompt and both PIN steps must be present, even if
Debit or Club Cards are not accepted.
Following is an example of how the Odometer, Vehicle, and PIN prompts are used.
Figure 3-1: Odometer, Vehicle, and PIN Prompts
Note: The ICR can be used for all prompts except debit transactions. Secure debit PIN
numbers cannot be entered on the ICR.
Tables (TABLE)
The receipt table must have at least 100 entries.
Transaction Format (TRFMT)
Ensure that the transaction printout format includes the following:
• Authorization number (field type 3)
• Dollar amount (field type 11)
• Expiration date (field type 28)
Ensure that the card account number, even if split among two or more fields does not total to
more than 19-digits.
The format must also include the minimum number of digits in the types of cards you accept.
This will help if you must perform a settlement manually.