Island card reader (reader) – Gasboy Buypass User Manual
Page 16
Configuration
Configuring the Site Controller
Page 12
MDE-4606B Gasboy CFN Series Buypass Credit and Debit Card Networks · August 2010
The Console parameters for Odometer and Auxiliary prompts must be acceptable to the new
PCI-compliant PIN Pads. For acceptable system prompts, refer to
. If the prompts deviate from the suggested list, the PIN Pad will not work
correctly. For details on setting up the Console, refer to MDE-4773 CFN III Configuration
Manual for Windows XP.
Island Card Reader (READER)
The ICR must be set up to prompt for specific information, depending on the types of cards the
site will accept:
• The Select Pump step must be performed before the Verify Card step.
• If Fleet Cards are accepted, ensure that the reader prompts for the auxiliary information
and odometer reading before it verifies the card.
• If Wright Express cards are accepted, ensure that the reader prompts for the odometer
reading before it verifies the card, and ensure that the number of digits to enter the field
under the Enter PIN parameter is set to 6.
To meet the industry PCI requirements, prompts are restrictive in what can be displayed. The
following is a list of suggested prompts to be displayed for Vehicle Number and Odometer. If
the prompts entered deviate from the table below, it is possible that the reader device may not
work correctly.
To process Club and/or Debit Cards, the PIN prompt step (type 3) must be added twice,
contiguously. The first PIN step is used for the prompting of Fleet Cards. The second PIN step
is used to prompt for a Debit Card’s PIN number. To avoid confusion, always include both PIN
steps, even if Club or Debit Cards are not accepted.
• The first PIN step is used for local cards. Newer PIN Pads and dispensers will only accept
specific type of prompts for a Fleet Card PIN number. Following are some of the most
common acceptable prompts.
Enter Personal ID
Enter Driver Number
Enter Club ID
Enter Fleet PIN
Enter ID Number
Vehicle Prompts
Odometer Prompts
ENTER VEHICLE NO
ENTER ODOMETER
ENTER VEHICLE ID
ODOMETER NUMBER
ENTER VEH TAG
ODOMETER READING
ENTER VEHICLE #
ENTER ODOMETER #
ENTER VEH TAG #
ODOMETER #