Gasboy Site Controller II CPU - Manual (Page 21)

MDE-4504 Site Controller II CPU/Memory Board/Program Upgrade Instructions · August 2005 Page 17
Reports Package Upgrade Upgrading
19 If the date and time are correct, type Y and proceed to the next step. If the date and time are
incorrect, type N. The program prompts you to enter the correct date.
20 Enter the correct date, and press ENTER. The program prompts you to enter the time.
21 Enter the correct time, and press ENTER. The program re-prompts you to confirm the date
and time.
22 Press CLEAR MENU when prompted. The Profit Point installation menu will appear on the
screen. Press 2 Update all program and menu files from diskette, and press ENTER. When
the installation is complete, press ENTER. You will return to the Profit Point installation
menu.
23 Press 0 Return to Profit Point main menu and press ENTER. Press any key when prompted.
24 Remove the Installation disk from drive A: and store it in a safe place.
25 Reboot the Personal Computer (PC) by switching the power off and on, or by pressing
CTRL+ALT+DEL.
26 The POS terminal initializes and comes up online.
Reports Package Upgrade
To upgrade the Reports Package, proceed as follows:
1 Insert the reports package diskette into drive A:.
2 Sign on to the Site Controller and type INSTALL. The new reports files are transferred to the
hard drive.
3 After all the files are copied, remove the diskette from the drive.