Gasboy Site Controller II CPU User Manual
Page 5
MDE-4504 Site Controller II CPU/Memory Board/Program Upgrade Instructions · August 2005
Page 1
Purpose
Introduction
1 – Introduction
Purpose
This manual provides instructions to upgrade a Site Controller (SC) II site to the latest version
of the Central Processing Unit (CPU) and the Memory Board. It also provides instructions to
update the software to the latest version. While performing these upgrades, the following
restrictions need to be considered:
• This upgrade will not work with sites that have 5-1/4" floppy drives.
• Sites with Gasboy Check Point consoles, which use Data Encryption Standard (DES)
encryption or odometer entry through their PIN Pad, have to upgrade their Check Point
firmware to V5.4 or higher (C08721KCON54).
• Upgrading an SC II from a spare parts kit (C04898/C04897) will require new SC II
software (C35570). Contact Gasboy Technical Service at 1-800-444-5529 to place an
order.
Parts List
The kit supplied along with this manual contains the following items:
Part #
Qty.
Description
C05852
1
SC II CPU board
C07041
1
Memory board
C35570
1
SC II 2.0 and above upgrade diskettes (latest
version)
C08721KS240X
1
D-site chip (latest version)
C08919
1
Profit Point software (latest version)
C09622
1
F/F #8-32 standoff, 11/16" long (nylon)
C04126
1
M/F #8-32 standoff, 1/4" long
C35837
1
Instruction sheet
Intended Users
• Authorized Service Contractors (ASCs)
• Customer Specified Contractors (CSCs)