Gasboy FiPay Server Retrofit Kit for 8-hose Islander - Manual (Page 18)

Installing the FiPay Server and Additional Hardware Components in the 8-hose Islander PLUS System
Page 18 MDE-5045 FiPay™ Server Retrofit Kit for 8-hose Islander Installation Guide · January 2013
27 Plug the Server power cable assembly into the Receipt Printer Connector (see Figure 22 ).
Note: Connector is keyed and can be plugged in only one way.
Figure 22: Plugging the Server Power Cable Assembly
Server Power Cable Assembly
28 Locate the Phoenix Connector for the Server.
29 Insert the red fused wire into the positive (+) side and black wire into the negative (-) side of
the Phoenix Connector [see
Figure 23 (ii) ].
Figure 23: Inserting the Red Fused Wire and Black Wire
+ -
Black Wire
Red Wire
(i)
(ii)
The red and black wires are inserted into the Phoenix Connector as shown in Figure 23 .