Gasboy FiPay Server Retrofit Kit for 8-hose Islander - Manual

MDE-5045 FiPay™ Server Retrofit Kit for 8-hose Islander Installation Guide · January 2013 Page 1
Introduction
Purpose
This manual provides instructions for installing a Server and additional hardware components
in the Islander
™ PLUS system using the FiPay ™ application. This Islander PLUS system is
connected to the T-Chek ™ network for card verification
Table of Contents
Topic Page
Introduction 1
Important Safety Information 4
Installing the FiPay Server and Additional Hardware Components in the 8-hose
Islander PLUS System
6
Required Tools
Following tools are required for installing the FiPay Server and additional hardware
components in the Islander PLUS system:
• Islander PLUS for 8-hose Mechanical Pumps (PA093400801)
• Wire Stripers/Cutters
• Electrical Tape
• # 2 Phillips
® Head Screwdriver with 8-10-inch Blade
• 9/32-inch Nut Driver
Parts List
Following table lists the parts included in the M13062K001 Kit for installing the FiPay Server
and additional hardware components in the Islander PLUS system.
Item Description Part Number Quantity
1 5-port Switch M09680B032 1
2 Wiring Harness with Fuse M09680B036 1
3 3-feet Ethernet ® Patch Cable Q13850-03 3
4 FiPay Network Server PA0414000 1
5 Server Bracket M13062A001 1
6 Wire Clips Q13558-04 4
7 M4 X 16 Phillips Head Screws Q12845-60 2
8 FiPay Server Retrofit Kit for 8-hose Islander Installation Guide MDE-5045 1
MDE-5045
FiPay ™ Server Retrofit Kit for 8-hose Islander
Installation Guide
January 2013