Gasboy FiPay Server Retrofit Kit for 8-hose Islander - Manual (Page 17)

MDE-5045 FiPay™ Server Retrofit Kit for 8-hose Islander Installation Guide · January 2013 Page 17
Installing the FiPay Server and Additional Hardware Components in the 8-hose Islander PLUS System
24 Push the FiPay Server into the bracket and ensure that the bracket will clear the Islander PLUS
frame. Adjust the bracket by pushing the mounting base of the bracket back against the side of
the cabinet, if required (see
Figure 20 ).
Figure 20: Adjusting the Bracket
Ensure that the bracket
clears the frame.
FiPay Server
25 After checking the clearance, remove the FiPay Server from the bracket and place it in a
secure location.
Wiring the FiPay Server
26 Locate the Receipt Printer Connector at the bottom of the Islander PLUS (see Figure 21 ).
Figure 21: Receipt Printer Connector
Receipt Printer Connector