Completing installation, T, proceed to, Warning – Gasboy 8700K User Manual
Page 13
MDE-4512A Lamp Kit (M06227K00X) Installation Instructions for Atlas® 8700K/9100K and 8800K/9800K · June 2014
Page 13
Completing Installation
6
Connect the union to the bushing on the J-box.
7
At the top of the conduit, bend and shape the conduit to accommodate connecting to the black
and white wires extending from the AC IN side of the LED driver assembly.
8
Using the tie-wraps, secure the conduit to the unit to prevent movement. For typical tie-wrap
placement, see
on
9
Once the wiring in the J-box is complete, remount the J-box cover and secure with the bolts
saved.
Installing the retrofit conduit (mechanical models) is now complete.
Completing Installation
To complete the installation, proceed as follows:
1
Complete the wiring to the LIGHT FEED and LIGHT NEUTRAL in the AC J-box. For more
information, refer to MDE-4331 Atlas
Fuel Systems Installation Manual and Atlas wiring
diagrams.
2
On the electronic model units, secure the display panel in the upright position.
3
Attach the bezel. Ensure the bezel is seated properly to ensure a watertight seal.
4
Attach and lock the front panel.
5
Turn on all the circuit breakers supplying power to the unit.
Avoid looking directly at the LEDs when lit. Ensure bezels are in place with brand
panel graphics installed before lighting LED strips.
WARNING
Installing the Lamp Kit in Atlas pumps/dispensers 8700K/9100K (mechanical) and
8800K/9800K (electronic) is now complete.