Gasboy 8700K User Manual
Page 11
MDE-4512A Lamp Kit (M06227K00X) Installation Instructions for Atlas® 8700K/9100K and 8800K/9800K · June 2014
Page 11
Installing Lamp Kit (M06227K00X)
11
If only one LED strip is being installed, the black wire from the LED driver connects to the
V- input on the J2 connect of the LED strip.
Figure 7: LED Strip Wiring - Single Strip
12
Using the Adhesive Cable Mounts (Q13558-04), secure the installed wiring up and out of the
way.
Figure 8: Securing the Wiring
Adhesive Cable
Mount (Q13558-04)
J1 Connector
Black Wire
For electronic models (8800K/9800K), connect the AC power extension cable P403 connector
to the J403 connector of the pump/dispenser main AC conduit assembly.
For mechanical models (8700K/9100K), connect the AC power wires (black and white) from
the LED driver to the AC power from the reset assembly (units that have resets fitted for the
light option) or the Retrofit Conduit (021433) supplied with the kit. Secure wire connections
with wire nuts. For installing the retrofit conduit, refer to
.
Installing the LED driver and LED light strip is now complete.
If installing the kit in an electronic unit, proceed to