Gasboy Blackmer GDP - Manual (Page 2)

Page 2 MDE-4096C Blackmer® Global Dispenser Pump Operation, Maintenance and Kit Installation Manual · April 2008
Introduction
Required Tools
The following tools are required for the installation of the kit:
• 5 mm Allen ® wrench
• 1/4-inch Allen wrench
• Heavy snap ring pliers
• Ratchet wrench
• 16 mm socket
• 13 mm or 1/2-inch socket
• Rubber mallet
• Torque wrench
Required Reading
Before servicing the pump, the technician must read, understand, and follow this document.
Failure to do so may adversely effect the safe use and operation of the equipment.
Related Documents
Document Number Title GOLD Library
MDE-3802 Encore ® and Eclipse ® Site Preparation
Manual
Encore and Eclipse
MDE-2833 Pumps and Dispensers Site Preparation Site Prep
MDE-2530 Pump and Dispenser Installation Manual Advantage ® and Legacy ® models
MDE-3985 Encore Installation Manual Encore and Eclipse
Pump Model Identification
The pump model identification plate is located on the rear cover. The pump model number
begins with M00955B. For example, M00955B207 is a complete model number.
Abbreviations and Acronyms
Term Description
ASC Authorized Service Contractor
cmHg centimeter of mercury
CW Clockwise
CCW Counterclockwise
GDP Global Dispenser Pump
gpm gallons per minute
inHg inch of mercury
lbs pound-force
lpm liters per minute
mm millimeter
N/A Not applicable
Nm Newton-meter
OIML International Organization of Legal Metrology*
Opt. Optional