Gasboy 9120K Series Installation - Manual (Page 5)

MDE-4567C 9120K and 9820K Series AST Pumps Installation and Operation Manual · September 2008 Page 1
Purpose Introduction
1 – Introduction
Purpose
The purpose of this manual is to assist Gasboy Authorized Service Contractors (ASCs) in
installing and operating the following units used with Aboveground Storage Tanks (ASTs):
• 9120K Compact Mechanical Commercial pump
• 9820K Electronic Commercial pump
Note: Whenever information in this document applies to all the units listed above, the 9X20K
model reference is used.
General Description
Model 9120K
The Gasboy Series 9120K pump units are UL ® -listed.
Note: NFPA regulations do not allow tank-mounted pumps to be used for the resale of fuel.
Model 9120K offers four-wheel mechanical-interlock registers. Mechanical pump registers
show the total volume for a delivery up to 999.9 gallons.
The standard features and specifications of the 9120K Series pumps are as follows:
• Discharge elbows
• A 12-foot length of hose
• A working voltage of 115/230 VAC, 50/60 Hz
• Mechanical Volume Totalizer
• A Switch Detect and optional pulser outputs which allow monitoring of the register's
operation when it is connected to an automated fuel management system.
• Four-piston, positive-displacement meter
• Belt-driven, positive-displacement rotary-vane pump with an 80 mesh (300 micron)
strainer and integral air-separation
• Cabinet height of 25.4 inches. The other dimensions may be found on the base layout.
• Standard Cabinet finish has the top, sides, and back painted black while the front panel is
painted white.
• Filters
The available options and accessories for the Gasboy Series 9120K pumps are as follows:
• Interchangeable Automatic Nozzles
• Pulsers
• Special Lengths of Hose
• Vapor Recovery System
• 380 VAC 3-Phase Motor