Evoko Room Manager System Administrators Guide - Manual (Page 25)

Ver 8.0 – 2014-03-31
25
To export the settings, click on the “Export to USB” tab in the Evoko Control Panel and
follow the instructions. All the files required for an upgrade of the Evoko Room Manager
are put in the Evoko Room Manager folder on the USB-stick.
We recommend that only one USB stick be attached to the PC when exporting settings
from the Evoko Control Panel. If multiple USB sticks or any other removable discs are
detected, you will be prompted to select the one you would like to use.
Exporting process
Fill the connection settings, System properties and Dashboard. In the Dashboard screen
select Finish and Export or directly select export to USB tab and select Export to USB
button.
5.9 Install or upgrade your Evoko Room Manager
5.9.1 First installation
If this is a first time installation the device will prompt you to enter the USB stick with the
configuration and latest application. Just follow the on screen instructions and wait for the
operation to complete.
Select which of the available groups and rooms the specific device should be associated
with. It is important that only one device be connected to any specific room. Having two
or more devices connected to the same room can cause conflicts.
If you like to have more than one Room Manager per room you can set them up as
different rooms in the Evoko Control Panel but using same user/resource and credentials.
For example, Jupiter and Jupiter(inner) could both be configured against the room
[email protected] but exist as two different room in the Control Panel. It is also
important to make sure that maximum one of the rooms have “Confirm” functionality
active.
Congratulations! The Evoko Room Manager system should now be up and running.
5.9.2 Upgrade application and configuration
It is possible to upgrade the Evoko Room Manager application and configuration.