DNF Controls 4000CL-N - Manual (Page 5)

5 4000CL-N, NATIVE Protocol
Getting Started . . .
2. SYSTEM DESCRIPTION
’
Quickly & Easily access up to 400 video clips on Grass Valley Group PROFILE using
Native control protocol.
’
Quickly access FILL & KEY clips from a single Cue Point.
’ Press
[PLAY] to play out two video channels simultaneously in sync.
’
Control up to 4 video channels individually or ganged LOOP up to 4 channels
FEATURES
The 4000CL-N, 400 Clip Fast Access System consists of the ST300-SSM with Clip software. The
400 Cue Points are saved in non-volatile Cue Point memory in the ST300.
Press [LEARN] to learn the CLIP ID and current IN time of each clip on up to 4 video channels
and the current GANG mode into the selected Cue Point on the ST300.
LOAD a Cue Point to recall the learned CLIP ID and cue to the learned Time on up to 4 video
channels and setup the “learned” GANG mode. Quickly & Easily learn and re-learn Cue Points.
DEFINITIONS
‰ Throughout this document, the Grass Valley Group Profile will be referred to as the Profile or
Video Server.
‰ The ST300-S/SM as the ST300.
‰ Words surrounded by brackets, for example [ENTER], are keys on the ST300.
‰ [XXX] + [XXX] means hold the two keys down simultaneously.
‰ Softkey refers to the multiple functions keys located below the display window.