DNF Controls 4000CL-N - Manual (Page 18)

18 4000CL-N, NATIVE Protocol
TAPE TIME NDF = non-drop frame. DF = drop frame.
STOP MODE PB = while playing a clip, when [STOP] is pressed, the Profile freezes on last
good video.
PB/EE = When [STOP] is pressed the first time, the Profile freezes on last good
video. When [STOP] is pressed a second time, video out is switched to video in.
WIND MODE Press Softkey to select:
HOLD (fast wind is maintained only while key is depressed).
OR
LATCH (fast wind is initiated and maintained with momentary key press).
Select fast wind speed (04X, etc.) by pressing Softkey.
SLOMO ST300 display shows:
For Wheel only:
Press Softkey [SPDRANGE] to select SLOMO speed ranges:
Press Softkey to select: 0 Æ +200 OR -100 Æ +200.
Press Softkey [BACK] to return to SLOMO MENU.
Press [ESC] to exit OR turn the wheel to select another item.
For Wheel only:
Press Softkey [PRSET] to select the SLOMO Preset Speed Mode
Press Softkey [UPDATE]. When exiting SLOMO mode, the last used speed is
saved in the Preset Speed register.
Press Softkey [STATIC]. The Preset Speed register is NOT updated when
exiting SLOMO mode. It is only changed by [SHIFT] + [SLOMO] (PRESET
SLOMO).
MAX SHUTTLE
SPEED
Press Softkey to select maximum shuttle speed of the Profile.
ST300 CONFIG Press Softkey [DRIVE], then press Softkeys to save the default drive or turn the
wheel to change the drive.
Press Softkey [ENTER] to return to the ST300 CONFIG screen.
Press Softkey [DIRECTORY] to save the default directory or turn the wheel to
change the directory.
Press Softkey [ENTER] to save the selected directory and return to the ST300
CONFIG screen.
TRANSMIT
CUELIST
Transmits Cuelist to another ST300 or to a PC.
SLOMO with: WHEEL
SpdRange Preset