DNF Controls 4000CL-N - Manual (Page 11)

11 4000CL-N, NATIVE Protocol
11. RECORDING A NEW CLIP
a.
To make a new clip and insert video from either another Profile channel or an external
source, first press [CLIP LIST]. The CLIP LIST indicator comes on.
b.
Since there is no clip loaded,
the display now shows:
c. Press
[LOAD].
d.
After pressing [LOAD], the display shows: “Manually enter ID”
Enter a numeric CLIP ID using the numeric keypad on the ST300.
e. Press
[LOAD] to save the new CLIP ID.
OR
Press [ESC] to abort without saving.
f.
Recall the Clip and then start the video that will be inserted.
g. Press
[RECORD].
h.
Press [STOP] when finished.
12. GOTO
a. Press
[SHIFT] + [RECUE] to enter a search time.
b.
Enter the desired time using the numeric keypad.
c.
Press [RECUE] OR press [ENTER] to GOTO the selected time.
13. VIEW CONTENT OF CUE POINTS
a.
Select the VTR for which you want to examine the contents of a Cue Point by pressing
[1], [2], [3] or [4].
b. Press
[NEXT CUE] or [LAST CUE] to step forward or backward through the Cue
Points.
OR
Enter a 1-, 2- or 3-digit number on the numeric keypad, followed by [ENTER].
The contents of the selected Cue Point are shown on the bottom line of the display.
14. RECUE
Press
[RECUE] to go to the beginning of the clip when 2 or more VTR connectors are used.
DO NOT PRESS [REWIND]: It may cause the offset between clips to be lost.
Create New Clip?
LOAD=OK Wheel=Next