DNF Controls 4000CL-N - Manual (Page 22)

22 4000CL-N, NATIVE Protocol
DISPLAY
DURATION OF
CLIP and
WHICH CLIP IS
LOADED
[SHIFT] + [LOAD] Display duration of currently loaded clip and which clip is
loaded.
PRESET SLOMO
SPEED
[SHIFT] + [SLOMO] Turn Wheel to preset slo-mo speed.
SLOMO
[SLOMO] Press [SLOMO] to slo-mo the VTR.
Turn the Wheel (or move the T-Bar if available) to change
the play speed.
Press [SLOMO] to STILL frame.
OR
Press any transport key to exit SLOMO.
STOP [STOP] Press once to STILL frame VTR.
Press again to put VTR into STOP mode.
PLAY TO LOOP [SHIFT] +
[LOOP ENABLE] Loops From the IN point to the OUT point of a clip
continuously.
LOOP ENABLE [SHIFT] + [PLAY] Plays clip from beginning to end then repeats.
GOTO end of
CLIP [SHIFT] + [FFWD] Position to last frame of clip.
GOTO beginning
of CLIP [SHIFT] + [REW] Position to first frame of clip.
TIME MODE
SELECT [TIME MODE] Press to toggle between Timecode (TC), VITC (VT) or Tape
Timer (TM) display modes.