Loading a clip, Capture function, A. setting an in (out) point – DNF Controls 2034CL-N User Manual
Page 7: B. clearing an in (out) point, C. goto time, D. ganging clips with previously set in points

7 2034CL-N, 300 Clip Instant Access System, Profile, NATIVE Protocol
4. LOADING A CLIP
a.
Select a VTR by pressing VTR [1], VTR [2] or VTR [3].
b.
Press [CLIP LIST] to view the list of Clips that exist in the VIDEO SERVER.
The CLIP LIST indicator comes on.
c.
The display now shows:
d.
Turn the Wheel.
The top line of the display will show:
(“xxxxxxxx” is the 8-character CLIP ID)
Turn the Wheel clockwise to scroll forward, or counter-clockwise to scroll backward,
through the list of available CLIP IDs.
OR
Enter the ID (if a clip has one) from the numeric keypad.
e. Press
[LOAD] to load the current CLIP ID shown on the top line of the display.
f.
Locate the clip to the desired IN time.
5. CAPTURE
FUNCTION
a.
SETTING AN IN (OUT) POINT
1)
Locate the clip to the desired IN (OUT) time.
2) Press
[IN] ([OUT]).
The IN (OUT) indicator comes on.
b.
CLEARING AN IN (OUT) POINT
Press and hold [DEL], then press and release [IN] ([OUT]).
The IN (OUT) indicator goes off.
c. GOTO
TIME
1) Press
[SHIFT] + [RECUE] to enter a search time.
2)
Enter the desired time using the numeric keypad.
3)
Press [RECUE] OR [ENTER] to GOTO the selected time.
d.
GANGING CLIPS WITH PREVIOUSLY SET IN POINTS
If a gang is established with the master having an IN point, the gang relationship will be
relative to the master IN point and all slave IN points will be overwritten.
Create New Clip?
LOAD=OK WHEEL=Next
XXXXXXXX LOAD=OK
ENTER ID: