DNF Controls 2034CL-N - Manual (Page 23)

23 2034CL-N, 300 Clip Instant Access System, Profile, NATIVE Protocol
c. CONNECTION AND CHANNEL ASSIGNMENTS
1) Press
[MENU], turn the Wheel to “Press VTR key for CH and CN
assignments.”
2)
Press VTR [1]. NOTE: VTR [X] toggles between CH and CN assignments.
3)
“VTR 1 Connection” is displayed on the top line.
The bottom line of the display shows “CHA CHB CHC >>> OFF”
4)
Press the keys under these selections to choose a channel.
Select “>>>” to view more channels.
5) Select
VTR [2], [3] and [4] and repeat steps 3 through 5.
6) Press
[ESC] at anytime to exit MENU mode.
NOTE: Set all unused VTR Connections and Channels to OFF.