Getting started, System description, Definitions – DNF Controls 2034CL-N User Manual
Page 5

5 2034CL-N, 300 Clip Instant Access System, Profile, NATIVE Protocol
Getting Started . . .
2. SYSTEM
DESCRIPTION
Instantly load a video clip at the press of a button.
Instantly load a FILL clip & KEY clip at the press of ONE button, then play out both
channels in sync.
Control up to 4 video channels individually or ganged, and LOOP up to 4 channels in
sync.
The 2034CL-N, 300 Clip Instant Access System consists of the ST300-SSM with Clip software
and the ST420 SHOTBOX. The ST300 and the SHOTBOX share a common, non-volatile Cue
Point memory in the ST300.
The Video Server is the Grass Valley Group PROFILE running Native Protocol.
The 10 banks of 30 switches each, on the SHOTBOX, provide instant access to 300 Clips.
Press [LEARN] on the SHOTBOX to learn the CLIP ID, current IN time of each Clip on up to 4
video channels and the current GANG mode into the selected Shotkey on the SHOTBOX (Cue
Point on the ST300).
Press any Shotkey on the SHOTBOX to instantly recall the learned CLIP ID and cue to the
learned IN time on up to 4 video channels and setup the “learned” GANG mode.
DEFINITIONS
Throughout this document, the Grass Valley Group Profile will be referred to as the “Video
Server.”
The ST300-S/SM as the ST300.
The ST420 as the SHOTBOX.
Words surrounded by brackets, for example, [ENTER], are keys on the ST300 or the SHOTBOX.
[XXX] + [XXX] means hold the two keys down simultaneously.
Softkey refers to the multiple function keys located below the display window.