Daktronics AF-3197-89-RGB - Manual (Page 50)

The connectors out to the pixel strips connect to the pixel strips in the following
manner:
Note: Columns are noted as how they are viewed from the front of the module (left
to right). When viewed from the back, the column order is from right to left.
Connector Pixel Strip Coordinates Connector Pixel Strip Coordinates
J11 Top Row, Column 1 J21 Bottom Row, Column 1
J12 Top Row, Column 2 J22 Bottom Row, Column 2
J13 Top Row, Column 3 J23 Bottom Row, Column 3
J14 Top Row, Column 4 J24 Bottom Row, Column 4
J15 Top Row, Column 5 J25 Bottom Row, Column 5
J16 Top Row, Column 6 J26 Bottom Row, Column 6
J17 Top Row, Column 7 J27 Bottom Row, Column 7
J18 Top Row, Column 8 J28 Bottom Row, Column 8
Controller
Reference Drawings:
Controller, Galaxy, 8-conn., J1087.............................. Drawing B-177838
Component Layout Diagram ....................................Refer to Appendix A
The controller sends data to the modules. Refer to the signal summary in Section 4.3
for more information and to the Component Layout Diagram for the position of the
controller board.
Figure 40 illustrates a typical controller.
Figure 40:Controller
Maintenance and Troubleshooting 4-6