Comtech EF Data SLM-5650A Vipersat - Manual (Page 81)

Chapter 3 - Using the Web Server Interface (WSI) 3-41
Additional Routing Configuration
For Hub SLM-5650As that are providing the TDM Outbound for a satellite
roaming network, set OSPF to Announcement Only. For roaming
Remotes, set OSPF to Disabled.
2. Set the parameter fields as described below. For the majority of networks,
the default settings are recommended.
Note: For systems that are already operating with OSPF, activation of any
parameter changes will result in a momentary stopping and re-starting of
the OSPF process.
Figure 3-44 OSPF Parameters Page
Topology
The Topology parameter identifies the network type for the specified
interface, Star or Mesh. Note that this setting is only applicable to Hub
routers; therefore, this field is active only when the Working Mode is set to
either Vipersat Hub or Multipoint Hub.
NOTE