7 management menu – Comtech EF Data CMR-8500 Manual User Manual
Page 69

CMR-8500 DVB IP Encapsulator
Revision 2
Chapter 4. Device Management via User Interfaces
4.2.5.7 Management
Menu
Figure 4-28. CMR-8500 Terminal Interface Management Menu
The Management Menu provides the following menu options:
V – Display Version Information - The CMR-8500 has two bootable slots. This selection displays the
firmware version of each slot, and indicates which slot the CMR-8500 is currently running.
R – Reboot Unit - Resets the CMR-8500.
F – Restore Factory Defaults - Allows restoration of most configurable settings back to the factory
defaults. The Management Network Interface settings will not be changed.
P – Reset Username and Password - Resets the Username and Password to the factory defaults. The
factory default username is comtech and the factory default password is comtech.
S – Save Configuration - Saves changes made permanently. If changes are made but NOT saved, then
changes will be lost upon the next reset of the CMR-8500.
T – Set Time/Date – Prompts to configure the date and time, enter the date in mm/dd/yyyy format and
time in hh:mm:ss format.
X – Exit - Exit this menu and return to previous menu.
4-37