Comtech EF Data CMR-8500 Manual - Manual (Page 41)

CMR-8500 DVB IP Encapsulator Revision 2
Chapter 4. Device Management via User Interfaces
The Home Page displays after a successful login authentication:
Figure 4-3. CMR-8500 Web Interface Home Page
Whenever changes are made to the configuration using the web interface:
Click the “Submit” button for the changes to take effect.
To save the changes upon a reboot of the system, click the “Save” tab on the
upper right of the web interface window.
Permanent changes to the configuration require two steps: first, click
“Submit”, then click “Save”.
4.2.4.1 Management Tab
The Management contains a sub-tab level for access to configuring the CMR-8500. These configurable
tabs are:
• Main – Contains the identification, security, and basic setup configuration settings.
• Syslog – Enables Syslog and configuration.
• FAST – Displays the available features controlled by FAST codes.
• Firmware – Displays the current version of firmware running, and the ability to update firmware via
TFTP or FTP.
• Auto Logout – Enables auto logout feature.
• Port – Enable configuring of ports for access (FTP, HTTP, and Telnet).
• Timers – Configuration of timers for encapsulation processes.
4-9