Comtech EF Data CMR-8500 Manual - Manual (Page 20)

CMR-8500 DVB IP ENCAPSULATOR Revision 2
Chapter 1 Introduction MN-CMR8500
1.4 Performance
The CMR-8500 provides the following performance characteristics:
Item Value Interfaces
Maximum Packets per Seconds
(Minimum Packet Size 64 Bytes) 150,000 packets per second (pps) GE to GE or GE to ASI
Maximum Bits Per Second
(Maximum Packet Size 1,518
Bytes) 155 Mbps (188 byte mode) GE to GE or GE to ASI
Egress Clock Accuracy Better than +/- 1 Kbps (KHz) -
Latency Less than 10 ms -
1.5 Specifications
The table below outlines the technical specifications for the CMR-8500 standalone unit. For detailed connector
pin assignment information, please refer to Chapter 3 – Interface Pinouts.
Parameter Specification
Physical
Dimensions 11.375” L x 17” W x 1.75” H (28.89 x 43.18 x 4.45
cm)
Weight 6 lbs (2.7 kg)
Power 50-60 Hz / 100-220VAC auto-sensing AC Input
ASI Copper Output
(2) BNC (75Ω)
ASI Copper Input (2) BNC (75Ω)
REF Ext/Int BNC (75Ω)
Ethernet
(10/100/1000BaseT)
GE-1 and GE-2 port RJ-45
Ethernet
(10/100BaseT)
Management port RJ-45
Terminal RJ-12
Aux RJ-12
LEDs
LED Color Description
STATUS Green/Red Red indicates error status,
green indicates status ok
ASI IN 1 Green Solid when ASI input to
this port is connected
ASI IN 2 Green Solid when ASI input to
this port is connected
REDUN Green Redundancy indicator.
Solid green unit is
redundant online and
flashing green is
redundant offline (backup)
FE ACT Amber Flashes when there is
Ethernet activity on this
port
1-4