Comtech EF Data CMR-8500 Manual - Manual (Page 13)

CMR-8500 DVB IP Encapsulator Revision 2
Preface MN-CMR8500
Metric Conversion
Metric conversion information is located on the inside back cover of this manual. This
information is provided to assist the operator in cross-referencing non-Metric to Metric
conversions.
Recommended Standard Designations
Recommended Standard (RS) Designations are interchangeable with the designation of
the Electronic Industries Association (EIA).
Trademarks
Windows is a trademark of the Microsoft Corporation.
Other product names mentioned in this manual may be trademarks or registered
trademarks of their respective companies and are hereby acknowledged. Comtech EF
Data neither endorses nor otherwise sponsors any such production or services referred
herein.
Electromagnetic Compatibility (EMC) Compliance
This is a Class B product. In a domestic environment, it may cause radio interference that
requires the user to take adequate protection measures.
Emissions Compliance
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the Federal Communications Commision (FCC) rules, and
EN55022 Class A requirements. (pending)
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
EN61000 Compliance
This equipment meets the EMC/immunity characteristics for the limits and methods of
measurement for information technology equipment as per EN61000-4-2, EN61000-4-3,
EN61000-4-4, EN61000-4-5 and EN61000-4-11. (pending)
This equipment meets the EMC/immunity characteristics for the limits and methods of
measurement of mains harmonics & flicker for information technology equipment as per
CE EN61000-3-2 and EN61000-3-3. (pending)
ix