Comtech EF Data CMR-8500 Manual - Manual (Page 60)

CMR-8500 DVB IP Encapsulator Revision 2
Chapter 4. Device Management via User Interfaces
4.2.4.7 Statistics
Figure 4-19. CMR-8500 Web Interface Statistics Tab
The Statistics Tab displays the aggregate statistics (all enabled routes combined) of the CMR-8500 as
well as the statistics for each individual route that is defined.
Navigation through the route statistics is similar to what is found on the Route Tab.
The user can also use the “Jump to Route #” for a quick traversal if
the CMR-8500 has a substantial number of routes defined.
The route statistics can be reset by using the “Clear All Statistics”
button.
The Statistics Tab can be monitored and auto-refresh by enabling the
“Auto-Refresh” setting. When Auto-Refresh is enabled, the browser
will be updated with updated statistics every time that the screen is
refreshed.
Arrow Function
Forward 10 routes
Forward 100 routes
Back 10 routes
Back 100 routes
Note that traffic statistics displayed on the web interface may be different than the
traffic statistics displayed on the front panel, depending on whether section packing
is enabled and the packet size of the traffic. Statistics are the rate of the resulting
egress rate of MPEG2 frames flowing over the egress transport stream.
4-28