Comtech EF Data LPOD - Manual (Page 89)

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter MN-LPOD
Ethernet-based Remote Product Management Revision 10
4–25
• An operating parameter is changed, e.g., when a command that changes an operational
value is executed successfully;
• A fault condition is triggered;
• A redundant switchover occurs.
4.5.4.4.2 Status | Status
Use this read-only page to review all pertinent information about the LPOD.
Unlike the remaining pages available through this interface that refresh/update only
when manually selected, the ‘Status | Status’ page updates automatically once every
10 seconds. Even with this automatic refresh function, you may click [Refresh] to
update the operational status parameters found on this page.
Figure 4-11. Status | Status page