Comtech EF Data LPOD - Manual (Page 194)

LPOD C-, X-, or Ku-Band Outdoor Amplifier / Block Up Converter (BUC) MN-LPOD
Appendix B Revision 10
B-2
B.2 Control and Data Cables
App B
FIG
CEFD
CABLE P/N DESCRIPTION
USED FOR:
REF App A
FIG
B-1 CA-0020526 Serial Interface Cable
(19-pin circular connector to RJ-11)
Connecting 1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone LPOD ‘J6 | PS ’ receptacle
to CLC-10 RJ-11 comms jack
(Cable and CLC-10 are furnished as part of optional CEFD KIT KT-0020518 )
A-1, A-3, A-12
through A-30
B-2 CA-0000352 Ethernet Interface Cable
(19-pin circular connector to <2X> RJ-45)
Connecting 1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone LPOD ‘J6 | PS ’ receptacle
to LPODnet Ethernet jack
(Cable and LPODnet are furnished as part of optional CEFD KIT KT-0000203 )
A-2, A-3, A-12
through A-30
B-3 CA-0000318 100’ COMMS Cable
(19-pin circular connector to bare end) Connecting 1:1 Redundant Loop Cable ‘J1’ receptacle or Standalone LPOD ‘J6 | PS ’ receptacle
to user-specified M&C interface
A-3, A-12
through A-30
B-4 CA-0000543 250’ COMMS Cable
(19-pin circular connector to bare end)
A-3, A-12
through A-30
B-5 CA-0020655
Rx / Tx Redundant Loop Cable
(19-pin circular receptacle to <2X> Type ‘N’
connectors, <2X> 19-pin circular connectors)
Interconnecting 1:1 Redundancy System LPOD units, Rx / Tx switches, and user M&C interface
A-3, A-12
through A-30
B-6 CA-0020657
Tx-only Redundant Loop Cable
(19-pin circular receptacle to <1X> Type ‘N’
connector, <2X> 19-pin circular connectors)
Interconnecting 1:1 Redundancy System LPOD units, Tx switch, and user M&C interface
A-3, A-12
through A-30