Comtech EF Data SMS-458B - Manual (Page 27)

2–1
Chapter 2. INSTALLATION
This chapter provides the information reflecting unpacking, external connections, and
installation.
2.1 Unpacking
The switch and manual are packaged in preformed reusable foam inside a cardboard
carton.
To remove the switch, proceed as follows:
CAUTION
Do not use any cutting tool that will extend more than 1 inch into the
container and cause damage to the switch.
1. Cut the tape at the top of the carton and open the flaps.
CAUTION
The switch weights 50 lbs. (22.68 kg). Use caution when lifting the switch
out of the carton to avoid bodily injury.
2. Lift off the preformed foam packing and remove the manual and the unit.
3. Save the packing material for reshipment either back to the factory or to another
site.
4. Inspect the equipment for damage incurred during shipment.
5. Check the equipment against the packing list shipped with the equipment to
ensure that the shipment is complete.
2.2 Rack Installation