Comtech EF Data SMS-458B - Manual (Page 112)

SMS-458B Modem Protection Switch Revision 2
Remote Control Specification MN/SMS458B.IOM
B–4
B.7 Modulator Configuration Commands/Responses
B.7.1 Prime Modulator Configuration Commands/Responses
Modulator
Active Command:
Response:
Status:
Response: >add/MA_x_yyy'cr''lf']
>add/MA_x_yyy'cr''lf']
Where: x = 1 to 4 (prime modulator number)
yyy = Yes or No
Modulator
Priority Command:
Response:
Status:
Response: >add/MP_x_y'cr''lf']
>add/MP_x_y'cr''lf'] Where: x = 1 , 2, 3, or 4 (prime modulator number)
y = 1, 2, 3, or 4
Where
1 = High
2 = Medium
3 = Low
Modulator
Online
Delay Command:
Response:
Status:
Response: >add/MD_x_yyy.y'cr''lf']
>add/MD_x_yyy.y'cr''lf']
Where: x = 1 , 2, 3, or 4 (prime modulator number)
yyy.y = 0.5 to 127 (time in increments of 0.5
seconds)
None
B.8 Backup Modulator Configuration Commands/Responses
Backup
Modulator
Active Command:
Response:
Status:
Response: >add/MA_Bx_yyy'cr''lf']
>add/MA_Bx_yyy'cr''lf']
Where: x = 1 or 2 (Backup modulator number)
yyy = Yes or No