B.11modem configuration commands/responses, B.11 modem configuration commands/responses – Comtech EF Data SMS-458B User Manual
Page 114
SMS-458B Modem Protection Switch
Revision 2
Remote Control Specification
MN/SMS458B.IOM
B–6
B.11 Modem
Configuration
Commands/Responses
Prime
Modem
Address
Command:
Response:
Status:
Response:
Where:
x = 1or 2 (prime modem number)
yyy = 1 to 255 (prime modem address)
Backup
Modem
Address
Command:
Response:
Status:
Response:
Where:
x = 1or 2 (backup modem number)
yyy = 1 to 255 (backup modem address)
Prime
Channel
Unit
Address
Command:
Response:
Status:
Response:
Where:
x = 1 to 8 prime channel unit number)
yyy = 1 to 255 (prime channel unit address)
The prime channel unit address command will return the
invalid parameter response (>add/?ER2_INVALID
PARAMETER) if the specified prime modem is not defined as
having an external channel unit. See the ‘CU_’ command.
Backup
Channel
Unit
Address
Command:
Response:
Status:
Response:
Where:
x = 1 to 8 backup channel unit number)
yyy = 1 to 255 (backup channel unit address)
The backup channel unit address command will return the
invalid parameter response (>add/?ER2_INVALID
PARAMETER) if the specified backup modem is not defined as
having an external channel unit. See the ‘CU_B’ command.
Prime
Channel
Unit
Selection
Command:
Response:
Status:
Response:
Where:
x = 1, 2, 3, or 4 (prime modem number)
yyy = None (no channel unit)
EXT = External Channel Unit
Backup
Channel
Unit
Selection
Command:
Response:
Status:
Response:
Where:
x = 1, 2, 3, or 4 (backup modem number)
yyy = None (no channel unit)
EXT = External Channel Unit