6 power supply, 1 sdm-9220 uac and sdm-9230 uac, 2 sdm-9220 dc and sdm-9230 dc – Comtech EF Data SDM-9220 User Manual
Page 87: Power supply -9, Sdm-9220 uac and sdm-9230 uac -9, Sdm-9220 dc and sdm-9230 dc -9, Information about the power supply is provided on, Power supply” on
Product Description
Memotec Inc.
5-9
5.6 Power Supply
The power supply is located on the right side when the SDM-9220/9230 unit is viewed
from the rear. A different power supply is provided on the UAC and DC units.
NOTE:
For information about the factory-supplied power cable and connection to the
power source, turn to
“Powering the Unit” on page 4-28
5.6.1
SDM-9220 UAC and SDM-9230 UAC
•
AC power connector
•
1 power switch (
1
=
ON
,
0
=
OFF
)
•
Voltage: Autosensing 100-240 VAC
•
Frequency: 50/60 Hz
•
Current: 0.8 A at 100 V and 0.4 A at 240 V
•
Maximum power consumption: 50 Watts.
NOTE:
Normal power consumption could be lower when the unit is not fully
populated.
5.6.2
SDM-9220 DC and SDM-9230 DC
•
DC power connector
•
1 power switch (
1
=
ON
,
0
=
OFF
)
•
Voltage: -48 VDC
•
Current: 2 Amps maximum