Comtech EF Data SDM-9220 User Manual
Page 42
SDM-9220/9230 Hardware Installation Guide
3-6
Memotec Inc.
-
One custom-made HD-26 cable for each serial port. Details are provided in
“Serial Port and User Equipment Connections” on page 6-1
.
-
One straight through 10/100BaseT LAN cable, RJ-45M to RJ-45M, for each
Ethernet port.
NOTE:
The above cables are not provided with the SDM-9220/9230 product package.
-
One RJ-11 to RJ-11 cable for each FXS or FXO port
-
One RJ-45 to RJ-45 cable for each E&M/PTT port
•
All user equipment that will be directly connected to the serial ports.
•
A sufficient number of ferrites for the cables connecting to the ports on the unit.
“Installing the Ferrites (EMI Filters)” on page 4-26
for the ferrites
required on the different product models for the various types of ports, the coun-
tries where these ferrites are required, and installation instructions.
NOTE:
These ferrites are not provided with the product package.