Comtech EF Data SDM-9220 - Manual (Page 12)

SDM-9220/9230 Hardware Installation Guide
1-2 Memotec Inc.
1.1 Product Overview
1.1.1 SDM-9220
The NetPerformer SDM-9220 is an entry-level standalone chassis designed for network
convergence at the branch office level. It is a high speed, low cost, flexible and powerful
unit that supports 8 analog or BRI/ST digital voice connections in a multitude of
application scenarios.
The SDM-9220 base unit has:
• One serial port equipped with HD-26 female connector
• Two 10/100Base-T Ethernet ports (RJ45 connectors)
• One console port
• Two expansion slots
• All UAC base units come equipped with universal AC power supply and a choice
of 120 VAC North American or 240 VAC European power cord (must be speci-
fied at time of ordering)
• The –48VDC versions include a 6-foot wiring harness
• A DB9F-DB9F console cable and 19-inch rackmount kit are also included in the
product package
• A custom cable (HD-26 male connector) is required for the serial port, available
from Memotec Inc. or your NetPerformer distributor.
The basic software set provides support of PowerCell Voice and Data (including legacy
user data) and IP routing over Ethernet, serial or digital ports using PPP or Frame Relay
RFC-1490. Optional software licenses can be procured for support of GSM, SkyPerformer
satellite access and TCP Acceleration.
1.1.2 SDM-9230
The NetPerformer SDM-9230 is a standalone chassis designed for network convergence at
the branch office level. It is a high speed, low cost, flexible and powerful unit that supports
analog/digital voice and data in a multitude of application scenarios. It is ideal for branch
offices that require support for up to 12 analog or 120 digital telephony channels.
The SDM-9230 base unit has:
• One serial port equipped with HD-26 female connector
• Two 10/100Base-T Ethernet ports (RJ45 connectors)
• One console port
• Three expansion slots for analog voice, digital (T1/E1) voice/data, BRI/ST voice/
data and dual serial interface cards