beautypg.com

2 gigabit ethernet data interface (cdi-70) example – Comtech EF Data CRS-180 User Manual

Page 111

background image

CRS-180 70/140 MHz IF 1:1 Redundancy Switch

MN/CRS180.IOM

Cables and Connections

Revision 11

5–51

5.7.2.2 Gigabit Ethernet Data Interface (CDI-70) Example

See CEFD White Paper “Bridged Ethernet Interface Redundancy” available for

download from Comtech EF Data’s Web site (www.comtechefdata.com).

Figure 5-44 shows an example of a CDM-700 1:1 modem configuration with a CDI-70 Gigabit

Ethernet Data Interface installed in Slot 1, with Slot 2 empty. This setup requires no cabling and

component kit – you must use user-provided Ethernet cables and Layer 2 Switch for direct

connection to the CDI-70.

CDM-700 Block Diagram – Gigabit Ethernet (GigE) Interface UserModemSwitchTraffic

Figure 5-44. CDM-700 CDI-70 Gigabit Ethernet (GigE) 1:1 Example

See also other documents in the category Comtech EF Data Equipment: