Comtech EF Data CRS-180 - Manual (Page 104)

CRS-180 70/140 MHz IF 1:1 Redundancy Switch MN/CRS180.IOM
Cables and Connections Revision 11
5–44
5.6.2.2 Gigabit Ethernet Data Interface (CDI-70) Example
See CEFD White Paper “Bridged Ethernet Interface Redundancy” available for
download from Comtech EF Data’s Web site (www.comtechefdata.com).
Figure 5-38 shows the block diagram and cabling example of a CDM-710 1:1 modem
configuration with a CDI-70 Gigabit Ethernet Data Interface in Slot 2, with Slot 1 empty. This
setup requires no cabling and component kit – you must use user-provided Ethernet cables and
Layer 2 Switch for direct connection to the CDI-70.
CDM-710 Block Diagram – Gigabit Ethernet (GigE) Interface UserModemSwitchTraffic
Figure 5-38. CDM-710 CDI-70 Gigabit Ethernet (GigE) 1:1 Example