Comtech EF Data OM20 - Manual (Page 175)

MN-OM20– Revision 5 D–1
Appendix D. Quick Start Guide
D.1 Introduction
This section provides quick setup instructions to access the Web Browser through the RJ45
Ethernet interface. The Web user interface allows for complete monitoring and control of all
modem parameters and functions via a 10BaseT Ethernet connection. For more details on the
various WEB configurations and a description of all the available selections, please refer to the
manuals.
D.2 Required Items
 Modem
 RJ45 to RJ45 cable
 Computer
 Default Plug (J2)
IMPORTANT
The Web Browser menus for the OM20 can only be accessed utilizing
Microsoft Internet Explorer 6 or greater.
D.3 Web Interface Setup Guidelines
D.3.1 Preparing the OM-20 for Web Setup
The unit is shipped from the factory with specific IP defaults. The factory defaults are set to an
unreachable state to minimize any adverse effects to the user’s network. In order for the user to
change the IP addresses to an accessible address the user must first install the Reset Plug onto J2
that is supplied with the unit. This will change the IP network setting that the user can access.