BECKHOFF BK3xx0 - Manual (Page 37)

Notes on the Documentation
Fieldbus Components 35
GSD Files
The following GSD files are to be used in order to link the PROFIBUS coupler in the DP configuration tool:
Standard GSD files
The standard GSD file contains all the important and fundamental properties required for operation of any master
controller. The Bus Coupler can be parameterised in a clear and comprehensible manner with this GSD file.
Bus Coupler German English as from firmware
BK3000 BK30becf.GSD BK30becf.GSE BN
BK3010 BK3010.GSD BK3010.GSE B9
BK3100 BK31bece.GSD BK31bece.GSE BT
BK3110 BK3110.GSD BK3110.GSE B9
BK3120 BK3120.GSG BK3120.GSE B9
BK3150 BK3150.GSG BK3150.GSE B0
BK3500 BK3500.GSD BK3500.GSE B9
BK3520 BK3520.GSD BK3520.GSE B9
LC3100 LC3100.GSD LC3100.GSE B9
BC3100 BC3100.GSD BC3100.GSE C3
Extended GSD files
Additional settings are necessary for certain applications. These extended GSD files contain a large number of
additional parameterisation options. It should be noted, however, that a thorough knowledge of the master controller
along with excellent familiarity with the Beckhoff bus terminal system is necessary here.
Bus Coupler German English as from firmware
BK3010 BK3010x.GSD BK3010x.GSE B9
BK3110 BK3110x.GSD BK3110x.GSE B9
BK3120 BK3120x.GSG BK3120x.GSE B9
BK3150 BK3150x.GSG BK3150x.GSE B0
BK3500 BK3500x.GSD BK3500x.GSE B9
BK3520 BK3520x.GSD BK3520x.GSE B9
LC3100 LC3100x.GSD LC3100x.GSE B9
BC3100 BC3100x.GSD BC3100x.GSE C3
Note
Note on the extended GSD file:
The GSD file contains a maximum of 244 bytes of input, output and configuration data.
These are the maximum values. Below are the default of values and the setting options.