Mounting and wiring, Mechanical installation, Dimensions – BECKHOFF BK3xx0 User Manual
Page 17

Notes on the Documentation
Fieldbus Components
15
3. Mounting and Wiring
Mechanical Installation
Dimensions
The system of the Beckhoff Bus Terminals is characterized by low physical volume and high modularity. When
planning a project it must be assumed that at least one Bus Coupler and a number of Bus Terminals will be used.
The mechanical dimensions of the Bus Couplers are independent of the fieldbus system.
The total width in practical cases is composed of the width of the Bus Coupler with the KL9010 Bus End Terminal and
the width of the Bus Terminals in use. Depending on function, the Bus Terminals are 12 or 24 mm wide. The front
wiring increases the total height of 68mm by about 5 to 10 mm, depending on the wire thickness.
Mechanical data
BK30x0, BK35x0, KL3110,
BK3120
BK3150
LC3100
Material
polycarbonate, polyamide (PA 6.6)
Dimensions (W x H x D)
50 mm x 100 mm x 68 mm
44 mm x 100 mm x
68 mm
21 mm x 100 mm x
68 mm
Mounting
on 35 mm C-rail conforming to EN50022 with lock
Side by side mount. by
means of
double slot and key connection
Marking
standard terminal block marking and plain language side (8 mm x 47 mm, not
BK3150)