Avery Dennison 9450 RASCAL - Manual (Page 9)

Function Keys
Several keys have special meaning in the 9450 Label Design
Software. Short descriptions of their functions follow.
F1 Toggles between full menu display and
single-line menu mode. Use with any menu.
F10 Interrupts the data being sent to the printer.
Use this key to stop the printer so you can
change label stock, adjust the labels, etc.,
without creating a printer error.
F12 Makes all arrow keys move the cursor in .01
inch increments.
ESC Stops the current function. ESC works the
same as Q (for Quit) on most menus. If you
press ESC while the 9450 software is sending
data to the printer, printing is cancelled. Turn
the printer off and then on again to clear the
printer buffer.
ARROW
KEYS Move either the cursor or a box representing a
field in the direction printed on the key. The
field or cursor moves in 0.20 inch increments.
If you use the arrow keys located on the
numeric keypad with Num Lock toggled ON,
the movement will be in 0.01 inch increments.
ENTER Sends information to the software. Various
prompts use this key to signal a particular
selection.
1. Introduction
1-3