Avery Dennison 9450 RASCAL - Manual (Page 26)

Menus
Each time a menu appears, you can select from it the option or
function you wish to perform. You can display menus in either
"Full Menu" or "Single Line Menu" mode.
Menu Modes
When you use Full Menu mode (the default), each menu
appears at the top of your display, with its options enclosed in
boxes with a selection letter above each box. Each box
contains a short description of the option. To select an option,
press the letter shown above the box.
When you use the Single Line Menu mode, each one-word
option appears at the top of your display, preceded by the letter
used to select the option. The advantage to the single-line
mode is that you can see the whole format as you design it.
You can switch back and forth between these two menu display
options by pressing the F1 key at any menu.
9450 User’s Manual
3-4