Avery Dennison 9450 RASCAL - Manual (Page 35)

Adding a Line Field
To add a line field:
1. Select L at the New Field Menu. You will see the format
display and the following message:
Enter the thickness of the line:
2. Enter the thickness of the line in inches and press [Enter].
You will see:
Use arrow keys to move to the BEGINNING
of the LINE. Press ENTER when done.
3. Use the arrow keys to move to the location on your format
where you want the line to start. Press ENTER. You will
see:
Use arrow keys to move to the END of the
line. Press ENTER when done.
4. Press the Right Arrow or Left Arrow to draw a horizontal
line. Press the Up Arrow or Down Arrow to draw a
vertical line.
Press ENTER when the line is complete. You are returned
to the Edit Format Menu.
Adding a Box Field
Use this function to add a box to your format. To add a box:
1. Select X at the New Field Menu. You will see:
Enter the line thickness of the box:
4. Designing Formats
4-7