Avery Dennison 9450 RASCAL - Manual (Page 55)

Adding Data to a Batch File
You can add data to the current batch file by using this function.
To add data:
1. Press A at the Batch File Creation Menu.
You will be prompted for any variable data on the label.
2. Enter the required data. Press ENTER.
If there are no incremented or decremented fields, you will
see:
Please enter the NUMBER OF LABELS you
would like to print.
If there are incremented or decremented fields, you will see:
Enter BATCH SIZE (number....)
then you will see:
Enter NUMBER OF BATCHES (number)
3. If the label contains no incremented or decremented fields,
enter the number of labels you want to print (up to 9999)
and press ENTER.
If your label contains incremented or decremented fields,
you can print several sets of labels before the field
increments or decrements. Enter the batch size and
number of batches and press ENTER.
For example, to print 10 sets of labels with an incremented
serial number starting at 30 and ending at 60, enter 30 for
Batch Size and 10 for Number of Batches. Press ENTER.
6. Batch Functions
6-3